Originally published in December of 2003

What is the basic template for bench press training?

Wednesday: Max effort bench press training

1. The max effort exercise: work up to 1 or 3 rep max

2. Supplemental exercise: Triceps movement The best exercises for this group include JM presses, and barbell or dumbbell extensions, board presses or rack lockouts.

3. Accessory movements: (triceps, lats, delts)

• This includes movements for the lats, shoulders and possibly extra tricep work. The best movements for this group include tricep extensions, rows, and various shoulder raises.

4. Prehabilation Movements: (training of the joints)

• This includes movements for the elbow and shoulder joints: The best movements for this group include external shoulder rotations, pushdowns and sled dragging for two to four sets of 12 to 15 reps.

Sunday: Dynamic bench press training

1. Bench Press: Work up to 8 sets of 3 reps using three different grips all inside the rings.

2. Supplemental Exercise: Triceps movement The best movements are close grip bench presses, JM presses, and dumbbell or barbell extensions, high board presses, or rack lockouts.

3. Accessory movements: (triceps, lats, delts)

• This includes movements for the lats, shoulders and possibly extra tricep work. The best movements for this group include tricep extensions or pushdowns, rows and various shoulder raises.

4. Prehabilation Movements: (training of the joints)

• This includes movements for the elbow and shoulder joints. The best movements for this group include external shoulder rotations, press downs and sled dragging for two to four sets of 12 to 15 reps.

What is the Basic Template for squat/deadlift workouts?

Monday: Max effort squat and deadlift training

1. The max effort exercise: work up to 1 to 3 rep max

2. The supplemental movement:

• This will include one exercise for the hamstrings. The best movements for them include partial deadlifts, stiff leg deadlifts, Romanian deadlifts and glute ham raises for three to six sets of 5 to 8 reps.

3. The accessory movements:

• One or two abdominal movements

• One lower back movement: The best exercise for this purpose is the reverse hyper for three to four sets of 6 to10 reps.

4. Prehabilation Movements

• This can include exercises for the knee and hip joints. The best movements for this purpose include any type of lower body sled dragging.

Friday: Dynamic squat and deadlift training

1. The box squat: Work up to 8 sets of 2 reps with prescribed percentage

2. The supplemental movement:

• This will include one exercise for the hamstrings. The best movements for the hams include partial deadlifts, stiff leg deadlifts, Romanian deadlifts and glute ham raises for four to six sets of 5 to 8 reps.

3. The accessory movements:

• One or two abdominal movements for three to five sets of 6 to 12 reps.

One lower back movement: The best exercise for this purpose is the reverse hyper performed for three to four sets of 8 reps.

4. Prehabilation Movements

• This can include exercises for the knee and hip joints. The best movements for this purpose include any type of lower body sled dragging.

What are the percentages to use on dynamic bench day?

The percentages for dynamic bench press day when using straight weight (no bands or chains) or chains are as follows:

  • Beginner - 60%
  • Intermediate - 55%
  • Advanced - 50%

The percentages are the same when using chains because there is a total deload at the bottom of the lift. Remember that these numbers are guidelines and are always subject to change. This is based on the lifter and bar speed.

What is work capacity and how do I increase it?

During a dinner conversation with Mel Siff (author of Supertraining) and Louie Simmons the topic of periodization training came up. Mel made a statement that I will never forget. He told us of a comment that was told to him by Medvedyev one of the originators of the periodization concept. This comment was that periodization training in the United States has been set back 40 years by some of the current books written on the topic. Not only will the progressive overload style of training lead to overtraining and stagnation it also ignores one basic concept of training, increasing work capacity.

Work capacity it the underlying component of any training program. It is the ability to perform work, which determines your level of fitness that in turn will determine your level of preparedness. If you raise your work capacity too fast you will overtrain and if you reduce it under your current level you will digress. If your work capacity is still at the same level it was two years ago then I will bet you are at the same strength and hypertrophy level you were to years ago.

You can increase your work capacity by several means described below.

Extra Training Sessions: There are several types of extra workouts that can make a tremendous difference in your training. Overseas it is not uncommon to see athletes performing up to 3 to 4 workouts per day. These workouts can be designed for a number of reasons.

Recovery Workouts: These training sessions may also be known as feeder workouts and are designed to aid in the recovery process. For example, if you performed a heavy bench press workout on day one with 400 pounds then on day 2 you would use the same exercise with very light weight for higher repetitions such as 135 for 2 sets of 20 to induce blood into the muscle to speed the recovery process.

Another type of feeder or recovery workout and the one most used a Westside barbell is with the use of a dragging sled. The dragging sled has helped are lifters with a multiple of training situations. We have seen the use of the sled add 30 to 60 pounds on one’s deadlift, aid in the recovery process, add lean body mass, and bring up weak points. The sled can be used for a number of different exercises for both the upper and lower body. Some of these include around the waist dragging, ankle dragging (drag the sled with the use of your ankles), pull through dragging (drag the sled by holding the sled strap between your legs), and upper body dragging (drag the sled by performing front raises, rear raises, side raises, presses and extensions). These sled exercises are best used with the empirical rule of 60%. This basically means that on the first day you choose the heaviest weight you will use for that exercise and decrease the weight by 60% for each day after that for three days. After that point, you repeat the process. This rule is essential for avoiding stagnation with any given exercise. A great benefit of the sled is for many of the exercises there is no eccentric motion. It is believed that the eccentric is responsible for DOMS (delayed onset muscle soreness). When the eccentric is taken away from the exercise you are left with a concentric motion that will induce blood flow to the muscle without causing DOMS.

What are the percentages to use on dynamic squat day when using chains or straight weight?

When using chains or straight weight, the percentages are as follows:

Beginner:

  • Week 1: 63% for 10 sets of 2 reps
  • Week 2: 65% for 10 sets of 2 reps
  • Week 3: 68% for 10 sets of 2 reps

Intermediate:

  • Week 1: 60% for 8 sets of 2 reps
  • Week 2: 63% for 8 sets of 2 reps
  • Week 3: 65% for 8 sets of 2 reps

Advanced:

  • Week 1: 55% for 8 sets of 2 reps
  • Week 2: 58% for 8 sets of 2 reps
  • Week 3: 60% for 8 sets of 2 reps

Four to six reps over the three weeks must be above training percent. This is done in addition to the regular sets.

Recommended Chains for Squatting

  • Squat Max 200-400 Pounds = 60-pound chain
  • Squat Max 400-500 Pounds = 80-pound chain
  • Squat Max 500-600 Pounds = 100-pound chain
  • Squat Max 600-800 Pounds = 120-pound chain
  • Squat Max 800-900 Pounds = 160-pound chain

The chains are added on to the weight of the barbell. Make sure to warm up with the chains on the bar first, and then add the weights. When the barbell is in the rack, four to five links of chain should be resting on the floor. At no point in time should all of the chain be off the floor during the squat

What are the percentages for dynamic squat day when using bands?

Regular Training Phase

  • Week 1: 47% 8 sets of 2
  • Week 2: 51% 8 sets of 2
  • Week 3: 53% 8 sets of 2

Four to six reps over the three weeks must be above training percent. This is done in addition to the regular sets.

This phase should be used by the majority of lifters.

Recommended bands for strength levels 

Squat:

Keep in mind, for the bands to work properly, you must have tension at the bottom.

Why do you guys teach squatting with a wide stance?

When you squat wide you create better leverages for the squat. The distance between your knee and hip is greater with a close stance, thus a longer and more difficult squat.

By using a wide squat you cut this distance back as well as place the emphasis on the glutes, hamstrings and lower back. These are the muscles that squat big weights! While squatting wide, try to keep your toes straight ahead or slightly turned out. This will create a tremendous amount of tension in the hips and glutes and make it hard to squat down. This tension will create a great stretch reflex out of the bottom of the squat. This is vital to the development of barbell speed

Why do you prefer the box squat over the free squat?

  1. You can sit back further when box squatting. This places more stress on the posterior chain muscles. Also, this puts less stress on your knees and will allow an athlete to train that may have had surgery or a previous knee problem.
  2. You always know how low you're going. If you want to squat two inches below parallel then set your box up at that height. This way your body will always sit as low as it's conditioned. If you want to squat one inch high, then set the box higher.
  3. It allows a lifter that has poor flexibility or weak hamstrings to squat correctly. Many times an athlete that has either of the above problems cannot free squat without the coaches and trainers cringing. By putting this athlete on an above parallel box it allows for a great workout. Make sure you take extra steps to strengthen the hamstrings and address the flexbility problem.
  4. Squatting on a box breaks the eccentric/concentric chain. This is one of the best ways to develop explosive strength. Fourth, the box is great for teaching proper squatting technique. Most athletes and lifters have very poor squat technique because of bad coaching, muscle imbalances, and flexibility. The box can work as a great aid to teaching the proper way to sit back into a squat.
  5. You can squat lower when using a box.
  6. You can correct mistakes at the bottom of a box squat. This is something impossible to do when performing a free squat.
  7. It's easier to teach someone how to squat when using a box.
  8. Your recovery between squat sessions is improved.

How do perform box squats correctly?

To take the bar out of the rack, the hands must be evenly placed on the bar. Secure the bar on the back where it feels the most comfortable. To lift the bar out of the rack, one must push evenly with the legs, arch the back, push your abs out against the belt, and lift the chest up while driving the head back. A high chest will ensure the bar rests as far back as possible. Slide one foot back, then the other, to assume a position to squat. Set your feet up in a wide stance and point your toes straight ahead or slightly outward. Also, keep your elbows pulled under the bar to ensure tightness in the upper back.

When you’re ready for the descent make sure to keep the same arched back position. Pull your shoulder blades together and pull as much air into your stomach as possible. Again, push your abs out. You’ll maintain this tightness throughout the set. To begin the descent, push your hips back and push your knees out to the sides to ensure maximum hip involvement. Once you reach the box, you need to sit on it and release the hip flexors while keeping the back arched and abs pushed out. At the same time, drive your knees out to the side.

To begin the ascent, keep pushing out on the belt, arch the back as much as possible, and drive the head, chest, and shoulders to the rear. If you push with the legs first your buttocks will raise first, forcing the bar over the knees and causing stress to the lower back and knees, thus diminishing the power of the squat. You need to keep the barbell in a direct line with the heels throughout the entire movement and this can only be done by keeping your back arched.

What is General Physical Preparedness (GPP) and why should I care about it?

GPP is intended to provide balanced physical conditioning between all the fitness components such as flexibility, strength, endurance, speed, and other factors.

According to Yuri Verkhoshansky in The Fundamentals of Special Strength Training in Sport and as outlined in Supertraining by Mel C Siff, there are several functions of GPP:

  • To strengthen or restore motor skills, which play an auxiliary role in perfecting sports ability.
  • To teach abilities developed insufficiently by the given sport; increase the general work capacity or preserve it.
  • To provide active rest, promote restoration after strenuous loading, and counteract the monotony of training.

What are some exercises I can do if I’m weak off the bottom portion of my bench press?

High-Rep Dumbbell Press

This movement is done with the use of a bench or stability ball. You want to do a standard dumbbell press but keep your palms facing each other; this will keep your elbows in the correct benching position. I’ve found the repetition range of 12 to 20 to work best with this movement.

You want to do three sets, trying to fail at around 20 reps for the first set. You’ll then rest about four to five minutes and try to hit 20 again for your second set. More than likely this won’t happen, but it gives you something to aim for. Rest another four to five minutes and knock off the last set. This method of dumbbell usage works best in place of the max effort movement.

Dumbbell Floor Presses

The floor press is another great way to teach you how to stay tight in the upper body when pressing. When your legs are out straight, more of the load is transferred to the pressing muscles.
To do this movement, you lie on the floor and have your training partners hand you the dumbbells. Once again you’ll want to keep your palms in. Lower the bells until your triceps hit the floor, pause for a split second, and press back up. This movement fits in nicely as the first movement you’d do after doing dynamic bench or max effort bench work. Play around with the sets and reps to see which work best for you but always try to break your record each time you do them.

Barbell Floor Presses

This is one of the classic max effort movements that’s stood the test of time. The floor press is performed by setting the hooks or supports up in a power rack so you can bench press while lying on the floor. Get under the bar with your shoulder blades together and shrugged into your traps. Tuck the elbows and unrack the weight. Lower the weight until your triceps hit the floor. Pause for a split second, and then press the weight back up in a straight line.

This movement can be done several ways. The first is with straight weight. Just warm up using three to five reps in an ascending pattern until you reach your one rep max. The second way would be to work up to 60% of your best bench press. When you reach this weight, you’ll begin adding one 20-pound chain on each side of the bar with each additional set until you max out.

For developing strength off your chest, using straight weight would be the best bet because it’ll teach you to press out of the bottom with maximal weights.

Cambered Bench Bars

A cambered bench bar has a four-inch camber in the middle of it to allow for greater range of motion. There are right and wrong ways to use this bar and the style you use is dependent on your own flexibility and ability to use the bar.

The first way is to take the bar down to your chest, which I believe works dynamic flexibility but is only beneficial with very lightweight. I don’t believe the heavy work should be taken all the way down to the chest because of the excess shoulder rotation.

The best way to use this bar is to bring it down to a point where it’s only about a half inch lower than where a regular bar would be. This way you won’t be getting any type of reflex off the chest. The last way to do this is with the use of boards to control how low the bar will go. Use two to three inches of boards so you can control how deep the bar will travel.

Ultra Wide Bench Presses

Ultra wide grip bench presses is simply a wide-grip bench press outside your widest grip. For most people, this would be with your forefinger on the rings. This isn’t a good movement to use for a one-rep max because of the stress it puts on the shoulders. It’s best done working up to two heavy sets of five or six reps.

How long can I use the bands on the bench press?

This is entirely up to the individual, but using bands for every workout is not advised. Here are some suggestions on how to cycle bands during your dynamic bench cycle.

  1. Alternate bands and straight weight every week.
  2. Alternate bands and chains every week.
  3. Three weeks of bands followed by three weeks of straight weight or chains.

These are just some suggestions and it's up to you to figure out what works best. Listen to your body and over time it will tell you what is best for your training. Mini-bands are always used when bench pressing.

What exercises can I do if I am weak off the floor when deadlifting?

If you are weak off of the floor when deadlifting, it is probably your lower back that is holding you back. Try doing good mornings (and its many different variations), reverse hyperextensions, back extensions and heavy abdominal work. Make sure your form is also correct as it could be a technical problem.

What are the most popular max effort movements for bench pressing?

Here are the exercises that are most often used for max effort bench press:

*Chains and bands can be added to any of the above lifts.

What are the most popular max effort exercises for the squat and deadlift?

Here are the exercises that are most often used for max effort squat and deadlift:

Good morning variations 

  • Safety squat bar suspended in chains
  • Cambered bar suspended in chains
  • Cambered bar good mornings
  • Good mornings

Deadlift variations 

  • Deadlift standing on mats (about 4” off the ground)
  • Deadlift off pins in a power rack
  • Reverse band deadlift
  • Deadlift pulling against bands (works well with the Jump Stretch platform)

Squat variations (all variations are done on a box) 

  • Safety squat bar
  • Cambered squat bar
  • Manta Ray squat
  • Front squat with front squat harness

* Use a box that is below parallel or well above parallel. Use a close stance when performing any max effort box squat; your feet should be closer than shoulder width.

What is a Dimel deadlift?

This exercise helped Matt Dimel increase his squat from the mid 800’s to over 1000 pounds in a two year period. To perform this exercise grab a barbell with an overhand grip about shoulder width apart. Pull the bar up to a standing position. At this point arch your back and get your abs tight. Keep the back as arched as possible, push the glutes out, and keep the knees slightly bent. Lower the bar by pushing your body weight back unto your heals while pushing your glutes out. Try to lower the barbell to a position just past the knees. At this point, you should feel a tremendous stretch in the glutes and hamstrings. Raise by contracting your glutes first, at the top of the movement contract the glute as hard as possible. Perform the exercise in a ballistic fashion. You want to drop to the midpoint position and explode back to the starting position.

powerlifting-tools